What is Your Car's "Check Engine" Light Telling You?
One of the most vital components to a properly functioning vehicle is the 'Check Engine' light. It alerts the driver to a variety of potential problems based on the vehicle's onboard diagnostic system, and can seem like one of the most mysterious lights on your dashboard. When the 'Check Engine' light comes on, it means that some system in your vehicle, including ignition, fuel injection or emission control, is not operating at peak performance, even if your vehicle appears to you to be running normally. The warning light generally indicates that the engine management computer has detected a malfunctioning fuel, emissions component, or a system failure.
Don't panic if you see the light: According to the Car Care Council, a glowing 'Check Engine' light doesn't mean you have to immediately pull the car over to the side of the road, but it does mean you should get the car checked out as soon as possible. Ignoring the warning light could severely damage engine components and incur additional repair expenses.
If your 'Check Engine' light comes on, first check the gas cap to make sure it wasn't left loose after a recent refueling -- sometimes this can trigger the 'Check Engine' light. Remove the gas cap, and then tighten it firmly again. If the cap was loose, the light should go out after a few short trips.
the gas cap wasn't the problem and the light continues to steadily
glow, have the system checked out as soon as possible. It may not be a
major problem though it may affect your car's performance, gas mileage,
and emission levels. Isolated or one-time fault signals are usually
wiped from the car's engine management system's memory within a few
driving cycles, but persistent or serious faults are stored and can
continue to trigger the warning light. A light that flashes requires
more prompt attention, indicating a more severe condition that must be
checked out immediately to prevent damage to the catalytic converter.
When you experience a flashing light, minimize driving at high speeds
or under heavy loads.
When scheduling service, make sure the automotive shop that diagnoses your car has professional technicians who are properly trained and certified for OBDII diagnosis and repair. The technician will connect your vehicle's computer to a diagnostic computer, which will provide a "trouble" code to assist the technician in determiming why the 'Check Engine' light was activated.
The oxygen sensor is among the most common causes of a "check engine" warning. A degraded oxygen sensor can increase fuel consumption by 10 to 15 percent. However, it can be a gradual deterioration of the sensor and the driver may not notice the resulting reduction in overall engine performance.
Other problems may trigger the engine warning light to come on as well. They include:
* A failed sensor such as oxygen, coolant temperature, manifold absolute pressure (MAP), or airflow meter.
* Engine problems such as poor performance, faulty spark plugs and wires, or clogged fuel injectors.
* Emissions problems such as a loose or cracked vacuum hose, loose or missing gas cap, or a failed exhaust gas re-circulation (EGR) valve.
* Electrical wiring that has a short or open circuit.
While the diagnostic computer is connected to your car, the technician can check the idle speed, throttle response, engine temperature, fuel system pressure, manifold vacuum, exhaust emission levels, and many other key indicators. Once the problem is diagnosed and fixed, your car's computer makes sure everything is back to normal, and then turns off the 'Check Engine' light.
The Car Care Council recommends reading your vehicle owner's manual and familiarizing yourself with the purpose of the 'Check Engine' light and every other gauge and warning indicator on your dashboard.
The Car Care Council is MagicHands's source of information for the "Be Car Care Aware" consumer education campaign promoting the benefits of regular vehicle care, maintenance and repair to consumers. For more information, visit .